Solid Carbide
Solid carbide cutting tools suitable for modern machining environments where optimization of performance and tool life is critical.
Chamfer Mills with a complete range of diameters capable of creating a 90° chamfer in most common and exotic workpiece materials.
Drill reamers that separate themselves from the competition using geometries with three distinct margins.
Precision cutting tools used to create recognizable features on the surface of a part.
A comprehensive program including a variety of geometries, modern coatings, and lengths capable of maximizing rigidity, performance and tool life.
A pilot or spot drill, also known as a starter drill, is typically required when the succeeding drill is longer than 10xD or smaller than Ø 1.00 mm. Starter drills can also be used to improve hole location due to their short, rigid geometries.
An extensive lineup of unique micro and high-performance drill geometries with a wide range of diameters and lengths capable of optimizing productivity and cost per hole.
SKU: 40.44400.0500
Carbide Noventa Chamfer Mill, Ø5.00mm x 90°, AlTiCrN
SKU: 40.44400.0600
Carbide Noventa Chamfer Mill, Ø6.00mm x 90°, AlTiCrN
SKU: 40.47000.0300
Carbide End Mill, Ø3.0mm x 1.5-4xd x 2-fl/55°
SKU: 40.47000.0400
Carbide End Mill, Ø4.0mm x 1.5-4xd x 2-fl/55°
SKU: 40.47000.0500
Carbide End Mill, Ø5.0mm x 1.5-4xd x 2-fl/55°
SKU: 40.47000.0600
Carbide End Mill, Ø6.0mm x 1.5-4xd x 2-fl/55°
SKU: 40.47000.0800
Carbide End Mill, Ø8.0mm x 1.5-4xd x 2-fl/55°
SKU: 40.47000.1000
Carbide End Mill, Ø10.0mm x 1.5-4xd x 2-fl/55°
SKU: 40.47000.1200
Carbide End Mill, Ø12.0mm x 1.5-4xd x 2-fl/55°
SKU: 40.47000.1400
Carbide End Mill, Ø14.0mm x 1.5-4xd x 2-fl/55°
SKU: 40.47000.1600
Carbide End Mill, Ø16.0mm x 1.5-4xd x 2-fl/55°
SKU: 40.47000.2000
Carbide End Mill, Ø20.0mm x 1.5-4xd x 2-fl/55°
SKU: 40.47500.0600
Carbide End Mill, Ø6.0mm x 4.5-8xd x 2-fl/55°
SKU: 40.47500.0800
Carbide End Mill, Ø8.0mm x 4.5-8xd x 2-fl/55°
SKU: 40.47500.1000
Carbide End Mill, Ø10.0mm x 4.5-8xd x 2-fl/55°
SKU: 40.47500.1200
Carbide End Mill, Ø12.0mm x 4.5-8xd x 2-fl/55°
SKU: 40.47500.1600
Carbide End Mill, Ø16.0mm x 4.5-8xd x 2-fl/55°
SKU: 40.47500.2000
Carbide End Mill, Ø20.0mm x 4.5-8xd x 2-fl/55°
SKU: 40.50620.0050
Carbide Micro Drill, Ø.50mm x 10xd
SKU: 40.50620.0055
Carbide Micro Drill, Ø.55mm x 10xd
SKU: 40.50620.0060
Carbide Micro Drill, Ø.60mm x 10xd
SKU: 40.50620.0065
Carbide Micro Drill, Ø.65mm x 10xd
SKU: 40.50620.0070
Carbide Micro Drill, Ø.70mm x 10xd
SKU: 40.50620.0075
Carbide Micro Drill, Ø.75mm x 10xd
SKU: 40.50620.0080
Carbide Micro Drill, Ø.80mm x 10xd