Spindle Measurement
Regular spindle measurement is a necessity. Periodical measurement of the spindle retention force avoids unknown reduced rigidity.
Cost reduction is achieved with the ATC Alignment Tool to ensure your machine tools, tool holders and cutting tools are aligned to remain in good condition.
The Dyna Contact taper gauge can be used to visually check the contact between the gauge and the spindle to quickly and easily determine the accuracy of a machine spindle taper.
Dyna Force is used to measure the retention force of a machine tool spindle. A higher pulling force of your machine will enhance cutting performance.
Test bars to measure the machine spindle for static accuracy.
SKU: BBT30-32-L150
Dyna Test Bar, BIG-PLUS BT30xØ32xL150mm
SKU: BBT40-50-L200
Dyna Test Bar, BIG-PLUS BT40xØ50xL200mm
SKU: BBT40-50-L350
Dyna Test Bar, BIG-PLUS BT40xØ50xL350mm
SKU: BBT50-50-L200
Dyna Test Bar, BIG-PLUS BT50xØ50xL200mm
SKU: BBT50-50-L360
Dyna Test Bar, BIG-PLUS BT50xØ50xL360mm
SKU: BCV40-2.000-L13.5SD
Dyna Test Bar, BIG-PLUS CAT40xØ2xL13.5
SKU: BCV50-2.000-L13.5SD
Dyna Test Bar, BIG-PLUS CAT50xØ2xL13.5
SKU: BDV40-50-L340SD
Dyna Test Bar, BIG-PLUS SK40xØ50xL340mm
SKU: C5-32-215
Dyna Test Bar, BIG CAPTO C5xØ32xL215mm
SKU: C5-40-250
Dyna Test Bar, BIG CAPTO C5xØ40xL250mm
SKU: C6-40-150
Dyna Test Bar, BIG CAPTO C6xØ40xL150mm
SKU: C6-40-200
Dyna Test Bar, BIG CAPTO C6xØ40xL200mm
SKU: C6-40-320
Dyna Test Bar, BIG CAPTO C6xØ40xL320mm
SKU: C8-40-200
Dyna Test Bar, BIG CAPTO C8xØ40xL200mm
SKU: C8-40-320
Dyna Test Bar, BIG CAPTO C8xØ40xL320mm
